Tevion Fs 5000 Software System

Mstar drivers usb. • Dear Customer, Congratulations on purchasing this high-quality TEVION® product. You have chosen a modern Film Scanner, with generous features and good accessories, which is especially easy to use. Please read this instruction manual before using the product with due care and attention, in particular, the safety instructions. Table of contents Page Introduction 1. Contents of box 2. Table of contents 3.

Safety instructions 4. Overview of device 5. Inserting negatives 6.

Inserting slides 7. Removing dust from scanner optics 8. Installing the software 9. Connecting the Film Scanner to your computer 10.

Find Nimo Software software downloads at CNET Download.com, the most comprehensive source for safe, trusted, and spyware-free downloads on the Web. By Operating System.

Safety instructions Improper use of the scanner and accessories puts you and others at risk of danger and may damage or destroy the scanner, so please read and observe strictly the following safety instructions, hazard warnings and general warnings. Purpose of use . •  Do not wrap anything around the Film Scanner and do not place it on top of clothing or textiles. This can potentially cause a build-up of heat within the unit, causing the housing to deform, and there is a risk of fire. Injuries and material damage . Overview of device Cleaning brush Slide feeder Negative holder Note: • This Film Scanner supports only Windows XP SP2 and above, Vista, Windows 7 and USB 2.0.

• In the interests of getting clear images at all times, it is advisable to clean the glass surface of the scanner’s media bay often using the cleaning brush (inclu- ded) or a clean, dry cotton bud free of alcohol. Inserting negatives Open the negative holder at the position marked “Open” and place the holder, open- ed, in front of you as shown below. Then place the negatives the usual way up (neither turned nor upside down) into the recesses provided in the holder for this purpose. Use the numbering on every negative strip as a guide. Inserting slides The supplied Film magazine can be used for slides of a variety of thicknesses up to a maximum of 3.2 mm. Before using the magazine it must be set to the thickness of the slides to be scanned.

Use the sliding button on the upper side of the slide feeder to choose from three thicknesses (see picture): 1) Upper position: for cardboard-framed slides up to 1.0 mm. • Note: • If the slide feeder is inserted into the scanner from the wrong side you will damage the scanner’s protective fl aps! Such damage cannot be repaired under warranty! Slides placed in the bay are pushed into the scanner one by one using the lever loca- ted on the side of the slide feeder. Removing dust from scanner optics Open the NimoFilm program just as if you were going to scan in an image (see page 15). Do not insert either the slide feeder or the negative holder into the scanner. You will now see in the NimoFilm preview window where any dust has gathered.